5) 3-phase 4-wire 6) Protection: IP21 or IP22 7) Insulation: class F/H 8) Standard: international electrician committee command standard IEC34, 9) Engine can be connected with steel or flexible materials standardization organization: command 10) Steel frame: cast-iron coverstandard, ISO8528 NEMA standardinternational 11) Excellent silicone steel chip 12) Imported bearings. You could choose one bearing or two bearings
Why Choose Us
Diesel generator set/Gas generator set/Alternator:12 months from shipment date.
Gasoline generator set:6 months from shipment date.
Spare parts:3 months from shipment date.
Factory Inspection: the test items before delivery are mainly as follows:
1.Each genset shall be put into commission more than 4 hours totally. They are tested on idle load, fully
load and 10% overload;
2.The noise level is tested
3.All of the meters on the control panel shall be tested
The appearance of the genset and all of the label and nameplate shall be checked
Ask product operation details, please consult the sales staff by e-mail or Trademanager.
The advantage of our material
1. The winding enamelled wire is 100% copper(20-1000kva)
2.The silicon steel sheet we use is the products of Shanghai Baoshan Steel Co.,Ltd,which is the biggest and most famous manufacture of steel.And its advantage is its magnetic flux is large and its iron loss is small.
3.The main frame of the alternator and lead box are made of steel,the end cover is made of high strength cast iron.
4.All the components of our factory,the stator,rotor and excitation will be dippinglacquer twice.
5.All the rotors and stators of our company use the rope of best nylon to tie.We promise the security of our products,the phenomenon of ribbon burst will never happen.
6.All the rotors should be tested by dynamic balance of Germany to go on test of balance. All the products of our factory should be tested by specialized Test Room.
Terminal and terminal box:
The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels
Engine Adaptor and Coupling Disc
SY-A Series generators have two kinds construction.
SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available.
SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available.
Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR
Brushless system and AVR of high quality ensure radio interference very little.