• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Fujian, China (Mainland)
  • Brand Name: alternator genetator
  • Model Number: ST STC STF LSM
  • Output Type: single phase/ three phases
  • Speed: 1500RPM
  • Frequency: 50/60HZ
  • Rated Power: 6.5-1760kw
  • Rated Voltage: 220-440V
  • Rated Current: 11.7-3168A
  • Excitation: brush/brushless
  • key words: alternator

Packaging & Delivery

Packaging Details Plywood case
Delivery Time within 25 days after receive your deposit

Data

Hot sale! Brushless Permanent Magnet Alternator Generator

 

Stamford brushless alternator

 

Certificate(CCC,CE,BV,ISO9001)

Three phase China supplier alternator

 

 

STF274K250.0200.0275.0220.0
STF314C250.0200.0275.0220
STF314D295.0236.0324.5260
STF314E325.0260.0357.5286
STF314F380.0304.0418.0334
STF354C450.0360.0495.0396
STF354D500.0400.0550.0440
STF354E600.0480.0660.0528
STF354F670.0536.0737.0590

 

MODELPowerpacking size20'container
KWKVA( C / M )( PCS )
ST SERIES   Single-Phase   ALTERNATOR   230V 50Hz 1500r/min COS=1.0
ST-2KW22.528×51×44440
ST-3KW33.7528×51×44440
ST-5KW56.2535×61×51236
ST-7.5KW7.59.3735×61×51236
ST-10KW1012.539×66×56196
ST-12KW121539×66×56196
ST-15KW1518.742×71×60126
ST-20KW202542×71×60126
ST-24KW243042×71×60126
ST-30KW3037.581×50×7096
STC SERIES   three-Phase   ALTERNATOR 400V 50Hz   1500r/min COS=0.8
STC-3KW33.7528×51×44440
STC-5KW56.2535×61×51236
STC-7.5KW7.59.3735×61×51236
STC-10KW1012.539×66×56196
STC-12KW121539×66×56196
STC-15KW1518.742×71×60126
STC-20KW202542×71×60126
STC-24KW243042×71×60126
STC-30KW3037.581×50×7096
STC-40KW405081×50×7096
STC-50KW5062.587×50×7087

  

 

 

 

The advantage of our material

1. The winding enamelled wire is 100% copper(20-1000kva)

 

2.The silicon steel sheet we use is the products of Shanghai Baoshan Steel Co.,Ltd,which is the biggest and most famous manufacture of steel.And its advantage is its magnetic flux is large and its iron loss is small.

 

3.The main frame of the alternator and lead box are made of steel,the end cover is made of high strength cast iron.

 

4.All the components of our factory,the stator,rotor and excitation will be dippinglacquer twice.

 

5.All the rotors and stators of our company use the rope of best nylon to tie.We promise the security of our products,the phenomenon of ribbon burst will never happen.

 

6.All the rotors should be tested by dynamic balance of Germany to go on test of balance. All the products of our factory should be tested by specialized Test Room.

 

 

 

 

Terminal and terminal box:

The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels

 

Engine Adaptor and Coupling Disc

SY-A Series generators have two kinds construction.

SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available.

SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available.

 

Voltage Regulation:

Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR

 

Interference factor

-THF(BS EN60034-1)<2%

-TIF(NEMA MG1-22)<50%

Brushless system and AVR of high quality ensure radio interference very little.

 

 

Product Description

 

1) Rated output: 10 to 1000kva 
2) Rated frequency: 50/60Hz 
3) Rated speed: 1500/1800rpm 
4) Rated voltage: 210-440V

 

5) 3-phase 4-wire 
6) Protection: IP21 or IP22 
7) Insulation: class F/H 
8) Standard: international electrician committee command standard IEC34, 
9) Engine can be connected with steel or flexible materials standardization organization: command 
10) Steel frame: cast-iron coverstandard, ISO8528 NEMA standardinternational 
11) Excellent silicone steel chip 
12) Imported bearings. You could choose one bearing or two bearings

 

Why Choose Us

Diesel generator set/Gas generator set/Alternator: 12 months from shipment date.

Gasoline generator set:6 months from shipment date.

Spare parts:3 months from shipment date.

Factory Inspection: the test items before delivery are mainly as follows:

1.Each genset shall be put into commission more than 4 hours totally. They are tested on idle load, fully

load and 10% overload;

2.The noise level is tested

3.All of the meters on the control panel shall be tested

The appearance of the genset and all of the label and nameplate shall be checked

 

Ask product operation details, please consult the sales staff by e-mail or Trademanager.

Our Services

 

Packaging & Shipping

 

Φ Want to know more?

Click here:Home >>All Products>> and Contact us!

 

 

FAQ

 

FAQ

1.What's your power range of Generators?

Answer:  We can offer the range from 1kva~1250kva.

2.What's your delivery time?

Answer:  Generally,we can delivery in 15-30 days after we get the deposit.

3.What's your payment?

Answer:  We accept T/T ,and 30% as the deposit,the balance payment should be paid before delivery the goods.

4.What's your warranty?

One year or 1000hours (accord to whichever reach first) from Ex-Factory date 

5.What's your MOQ?

Answer:We accept small power generator MOQ is 10 or 20 sets .Other accept  1 set.

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
8 Transactions 80,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $300,000
Learn More